Mounts & Adapters

The range and number of 2F1 adapters proves the 2F1 Battery is the most versatile battery on the market. Regardless of the output voltage, for any power requirements under 200watts, the 2F1 battery can quickly be adapted. A single 2F1 battery can change from a V-Lock camera battery to a three stud camera battery and then be adapted easily and instantly for a 28v led light.

2F1-ABA

Ultra-thin adapter plate that changes the 2F1 battery into a 14V gold mount battery.

2F1-VMA

Ultra-thin adapter plate that changes the 2F1 battery into a 14V V-Lock battery.

2F1-ABA-24V

Ultra-thin adapter plate that changes the 2F1 battery into a 28V gold mount battery.

2F1-MAF-MT-14

2F1 battery mount with adapter post for mafer clamp, configured for nominal 14.4 volt output via 4 pin XLR cable, 3 feet.

2F1-MAF-MT-28

Single C-Stand mount for 2F1 battery to supply 28V to a wide variety of lighting equipment via 3 pin XLR cable (also available in 14V).

T-POT

Dual 2F1 battery mount to power 14V, 28V or 48V equipment with simultaneous outputs. Comes standard with C-Stand mafer post.

S-Box

Dual 2F1 battery mount for 14V or 28V equipment with switchable outputs. Comes standard with C-xStand mafer post.

T14-ABA

Dual 2F1 battery mount for 14V gold mount equipment. Includes external DC input for uninterruptable power and switching (available also with Vlock or 2F1 plates).

T24-ABA

Dual 2F1 battery mount for 28V gold mount equipment. Includes external DC input for un- interruptable power and switching (available also with Vlock or 2F1 plates).

D-Box

Dual voltage 2F1 battery mount box with simultaneous 14V & 24V (regulated output) via 4 pin XLR and 3 pin XLR respectively; includes adapter post for mafer clamp.

2F1-Mount-14

Single Battery Mount for direct mounting on cameras, lights, or other equipment; screw pattern common to leading cine & HD cameras; provides a nominal 14.4VDC output; also includes an integrated D-Tap.

2F1-Mount-28

2F1 Battery Mount for direct mounting on cameras, lights, or other equipment; screw pattern common to leading cine & HD cameras; provides a nominal 28.8VDC output.

R48-Mini

The Dual Voltage R48-Mini is designed to provide flexible battery power options for high power 48V lighting equipment. The R48-Mini has two mounting options; directly to the light stand (MAF), and directly to the back of a Skypanel led light (SKY). The R48-Mini accepts two inputs from any High Current Sli or Legacy block in 28vdc mode. The R48-Mini provides one regulated 48V output up to 500 watts.

Side Car

Clip on a Side Car to your SLi-300/500 for the rare occasion when you need 24 or 28vdc. The optional Side Car is a great item for the toolbox for quick access to higher voltages.

MOUNTS & ADAPTERS